HobbyEagle A3 V2 3 Axis RC Airplane Gyro Fixed-Wing Flight Controller
HobbyEagle A3 V2 3 Axis RC Airplane Gyro Fixed-Wing Flight Controller
Hero image 0 of HobbyEagle A3 V2 3 Axis RC Airplane Gyro Fixed-Wing Flight Controller
Popular pick

HobbyEagle A3 V2 3 Axis RC Airplane Gyro Fixed-Wing Flight Controller

4.3 stars out of 1000 reviews
(4.3)|
4300 ratings

About this item

bus or PPM single-line receiver connection is being used. bus or PPM single-line receiver connection is being used. Download files: http://www.hobbyeagle. 3 wing types: standard fixed-wing, delta-wing(flying-wing), v-tail [PPM/Bus/G] is used for remote master gain, it allows you to adjust the master gain of the gyro by using a proportional knob or slider of the transmitter. However connecting this channel is not a must if you don't want to change the gain in the flight. [AIL], [ELE] and [RUD] should be connected to aileron, elevator and rudder channels of the receiver. 3 wing types: standard fixed-wing, delta-wing(flying-wing), v-tail. Remote master gain supported. The new A3 Pro V2 is a high-performance and... 32-bit MCU, high-precision 6-axis MEMS sensor, improved hardware platform and new firmware solution provide more reliable performance Sub Trim and Travel Limit settings supported. Specifications Main Controller: 32-bit MCU Sensor: High-precision 6-axis gyroscope and 6-axis accelerometer Gyroscope Scale Range: ±2000 dps Accelerometer Scale Range: ±4g PWM Output: 920uS ~ 2120uS with 1520uS center length / 50 ~ 333Hz Input Voltage: 4.8V ~ 8.4V Operating Temperature: -10 ? ~ 50 ? Size: 43×27×14mm Weight: 10g (excluding wires) Connection A3 Pro has 5 separate input channels which used to connect to the receiver and 3 output channels for servos, and supports standard receivers, PPM and Futaba's S.BUS(or S.BUS 2) single-line receivers. Compatible with most standard PWM receivers, PPM and multi-protocol digital serial receivers,Firmware upgradable <br> (an optional data cable is required) HobbyEagle A3 V2 3 Axis RC Airplane Gyro Fixed-Wing Flight Controller Specifications Main Controller: 32-bit MCU Sensor: High-precision 6-axis gyroscope and 6-axis accelerometer Gyroscope Scale Range: ±2000 dps Accelerometer Scale Range: ±4g PWM Output: 920uS ~ 2120uS with 1520uS center length / 50 ~ 333Hz Input Voltage: 4.8V ~ 8.4V Operating Temperature: -10 ℃ ~ 50 ℃ Size: 43×27×14mm Weight: 10g (excluding wires) Connection A3 Pro has 5 separate input channels which used to connect to the receiver and 3 output channels for servos, and supports standard receivers, PPM and Futaba's S.BUS(or S.BUS 2) single-line receivers. com/manuals/A3Pro_Menu_Overview_en. pdf Separated basic gain adjustment for aileron, elevator and rudder. <br>This gyro can be used with nearly any size and type of R/C airplanes and it will make the flying even easier and comfortable HobbyEagle A3 Pro / A3 Pro V2 6-Axis Gyro RC Flight [PPM/Bus/G] is also used as the input channel when a futaba's s.
$ 47
Price when purchased online
  • Free shipping
  • Free 30-day returns

How do you want your item?

You get 30 days free! Choose a plan at checkout.
How do you want your item?
Sold and shipped by gamaair.com
Free 30-day returns

Customer ratings & reviews

4.3 out of 5 stars
stars4300 ratings1000 reviews
How item rating is calculated
Filtered and sorted results would be available on the new 'Customer ratings & reviews' page.