This board comes fully populated with 3.3V regulator (5V max input), XBee socket, four status LEDs, and level shifting. The board was conveniently designed to mate directly with the SparkFun series of boards for wireless bootloading and USB based configuration. NOTE: The XBee Explorer Regulated does NOT come with the XBee. The board was conveniently designed to mate directly with the SparkFun Arduino Pro series of boards for wireless bootloading and USB based configuration. The SparkFun XBee Explorer Regulated takes care of the 3.3V regulation, signal conditioning, and basic activity indicators (Power, RSSI and DIN/DOUT activity LEDs). Zigbee Development Tools - 802.15.4 Xbee Explorer Regulated Plug an XBee into this breakout and you will have direct access to the serial and programming pins on the XBee unit and will be able to power the XBee with 5V. It translates the 5V serial signals to 3.3V so that you can connect a 5V (down to 3.3V) system to any XBee module. XBee modules sold below. XBee Explorer Regulated - Electronics Sparkfun Xbee Explorer Regulated Desertcart A guide for getting started with the SparkFun Digi XBee® Explorer Regulated Board