For more tips, please refer to the accompanying instructions. Best Boat Trailer Bunk Slides for Easy Loading and Unloading Boat Trailer Bunk Slides - 3 X 10 Boat Trailer Bunk Slicks EASY TO MOUNT - Using the included stainless steel screws, our slides and Bunk Enders fit easily and securely into a 2“, 4“or 6” trailer berth. Makes loading and unloading the boat on/off the ramp much easier! MADE TO LAST - Slides and Bunk Enders are made in the USA using slick, high-density polymer plastic and are designed to last in a marine. Package includes: Kit 1: 4 Pads (3x10) + 2 Bunk Enders + Stainless Steel Mounting Screws Kit 2: 8 Pads (3x10) + 2 Bunk Enders + Stainless Steel Mounting Screws Kit 3: 2 Bunk Enders + Stainless Steel Mounting Screws Easy to install,3-5 minutes slide on/off job done: Just take the boat to the marina, then back the truck down to the water, release the cable holding the boat to the trailer slowly, finally boat slide down smoothly and into the water. Warm Tips: 1.Don’t release the boat from the trailer hook before taking boat out of water. 2.Keep winch strap connected&locked boat from the trailer until it is in the water. Just be make sure the screws drop into countersink area to prevent scratching the boat hull. Boat weight limitation: 1,500 lbs for fiberglass boats, 4,000 lbs for metal boats.